MCINTOSH MP100 PHONOSTAGE
Housed in a compact chassis and only 3" tall the MP100 is a great phono stage to add to either a new Hifi or Home Cinema system.
With adjustments for the load to allow for close matching to your cartridge, the MP100 will be sure to bring out the best in your turntable.
The MP100 has 2 separate inputs one for MM and one for MC so if you have 2 turntables or a deck with 2 arms then there is now unplugging of cables!
Built to the amazing high McIntosh standards the MP100 is almost 4kg in weight.
With a choice of either RCA or Balanced XLR analogue outputs to match with your preference of interconnect.
The MP100 has a built-in Analogue to digital convertor, so you will be able to copy your records at the highest possible quality and make them available across all of your digital platforms.
Offering USB (for archiving to computer) or Optical or Coaxial digital for further options, the output is 24bit 96KHz so very high quality as you would expect!
- Total Harmonic Distortion
- 0.005%
- Frequency Response
- ±0.3dB from 20Hz to 20,000Hz
- Maximum Volts Out (Balanced / Unbalanced)
- 16/8 V RMS
- Input Impedance
- Moving Coil: 25, 50, 100, 200, 400 or 1k Ohms; 470pF
Moving Magnet: 47k Ohms; 50, 100, 150, 200, 300 or 400pF
- Phono Voltage Gain
- Moving Coil: 60dB
Moving Magnet: 40dB
- Signal To Noise Ratio
- Moving Coil: 78dB
Moving Magnet: 80dB
- Maximum Input Signal (Moving Coil)
- 8mV
- Maximum Input Signal (Moving Magnet)
- 80mV
- Maximum Input Signal (Balanced)
- N/A
- Maximum Input Signal (Unbalanced)
- N/A
- Sensitivity Phono (Moving Coil)
- 1mV
- Sensitivity Phono (Moving Magnet)
- 10mV
- Sensitivity (Balanced)
- N/A
- Sensitivity (Unbalanced)
- N/A
- Rated Output
- 2V Balanced
1V Unbalanced
- Output Impedance
- 200 Ohms Balanced
100 Ohms Unbalanced
- Phono Equalization Curves
- 1: RIAA
- Noise Filters
- 0
- Phono Profiles
- 0
CONNECTIVITY
- Phono Input Moving Coil
- 1 (adjustable)
- Phono Input Moving Magnet
- 1 (adjustable)
- Phono Input Universal
- 0
- Balanced Line Input
- 0
- Unbalanced Line Input
- 0
- Balanced Fixed Output
- 1 Stereo
- Unbalanced Fixed Output
- 1 Stereo
- Digital Coaxial Output
- 1
- Digital Optical Output
- 1
- Digital USB Audio Output
- 1
- Unbalanced Analog Connector Type
- Standard
CONTROL
- Power Control Input
- 1
- Power Control Output
- 1
DIGITAL AUDIO SPECIFICATIONS
- Digital Output Sample Rate
- Optical: PCM - 24-bit/96kHz
Coaxial: PCM - 24-bit/96kHz
USB: PCM - 24-bit/96kHz
GENERAL SPECIFICATIONS
- Multi-Chassis or Single
- Single
- Output Meters
- No
- Vacuum Tube or Solid State
- Solid State
- Power Consumption (On)
- 8 Watts
WEIGHTS & DIMENSIONS
- Dimensions (W x H x D)
- 11.5" (29.2cm) x 3.78125" (9.6cm) x 16.75" (42.5cm)
- Weight
- 8.6 lbs (3.9 kg)
- Shipping Weight
- 9.6 lbs (4.4 kg)